Home › Services › AC drain line leak
Problem guideAC drain line clogs and water leaks
A South Florida air conditioner removes several gallons of water a day from the air. That water exits through a condensate drain, often a small PVC line or a flexible hose, and it is the most common source of AC-related water damage. When the line clogs, the pan fills, the float switch shuts the system down, and water finds the nearest path out.
- Independent referral service
- No charge to homeowners
- One contractor receives your request
- No ratings or paid placements
Request a callback
Describe the symptom and your ZIP. One contractor receives it if one serves your ZIP.
Symptoms
- Water in the drain pan, on the closet floor, or a stain on the ceiling below the air handler.
- The system shuts off and will not restart, especially after humid days.
- A gurgling sound from the drain line.
- Musty odor near the air handler.
- Visible algae or slime at the drain pan or the trap.
Safe checks you can do
- Find the float switch and the drain pan. If the pan is full, the switch has done its job.
- Turn the system off before touching anything near the electrical cabinet.
- Look at the drain trap and the outdoor drain termination. Clear visible debris.
- You can sometimes clear a clogged line from the cleanout with a wet-dry vacuum, but do not use high pressure on a small line and do not force a stiff wire through a trap.
- If water is near electrical parts, the ceiling, or the air-handler insulation, stop and call.
Likely causes
- Algae and biofilm — Warm, wet drain lines grow a slime that narrows the line over months. This is the most common cause in South Florida.
- Dirty drain pan — Debris in the pan feeds the clog and can block the outlet.
- Poor slope or a sagging line — Water stands in a low spot and solids settle.
- Clogged trap — The trap holds water by design; when it packs with debris, the line backs up.
- Frozen coil — A frozen coil melts all at once and can overwhelm the drain and the pan.
What a repair involves
The technician clears the line, cleans the pan, checks the trap and the slope, and confirms the float switch works. On systems with a history of clogs, a secondary drain pan with a switch, or an access port for routine flushing, prevents repeat water damage. Clearing a drain is a short visit, and doing it before the rainy season is worth it.
Typical South Florida cost ranges
| Work | Published typical range | Notes |
|---|---|---|
| Diagnostic or service visit | $69–$250 | |
| Drain line clearing | $80–$250 | Published ranges from both cited South Florida guides. |
| Float switch replacement | $100–$250 | Published ranges vary with the switch type and access. |
| Drain pan replacement | $250–$700 | Depends on pan type and access; confirm on site. |
Source: AC Service Pro (South Florida contractor cost guide), published 2026-07-13; Koala Coolin (South Florida contractor cost guide), published 2026-07-12. Both guides publish installed price ranges for South Florida; neither states its sample size. These are ranges, not quotes. The contractor sets the actual price after inspecting the system, and you approve it before work begins. See the cost guide methodology.
Seasonal context
Drain clogs peak in the humid months and after a long vacation when the system runs with the house closed. Flushing the line before summer is inexpensive insurance.
Where to go next
Find your city · Cost guide methodology · What to check before you call · All services
How a request is handled
Your request includes the symptom, your ZIP code, how soon you need help and the best time to reach you. If a participating contractor covers your ZIP, that one contractor receives it.
If no participating contractor covers the ZIP yet, we tell you and your request is not shared with anyone else.
We do not promise an arrival time. The contractor confirms availability with you directly.
Questions
Why does my AC shut off when the drain is clogged?
The float switch is a safety device. It opens the low-voltage circuit when the pan fills, shutting the system down before water reaches the ceiling.
Can I pour bleach down the drain line?
A small amount of diluted bleach or vinegar can slow algae growth, but it does not clear an existing clog and can damage some pans and hoses. Mechanical clearing is more reliable.
The pan is dry but the system still will not run. Is the float switch stuck?
Possibly. A stuck float switch or a tripped safety switch requires a technician to test the circuit.
Request a callback
One contractor, if one serves your ZIP. No charge to you.
Request a callback
Tell us what is wrong. If a participating contractor serves your ZIP code, your request goes to that one contractor.