Home › Services › Refrigerant leak
Problem guideRefrigerant leaks: find the leak, then decide
An air-conditioning system is sealed. Refrigerant does not get used up like fuel; if the charge is low, refrigerant left the circuit through a leak. Adding gas without finding the leak buys time and costs money, and the system will lose the charge again. A proper diagnosis includes a leak search and a repair decision.
- Independent referral service
- No charge to homeowners
- One contractor receives your request
- No ratings or paid placements
Request a callback
Describe the symptom and your ZIP. One contractor receives it if one serves your ZIP.
Symptoms
- The system cools poorly, especially on hot afternoons, and the suction line is not cold.
- Ice forms on the indoor coil while airflow remains normal.
- The outdoor unit runs longer than usual and the electric bill rises.
- A hissing or bubbling sound at the indoor or outdoor coil.
- Oil residue or corrosion at a brazed joint or a Schrader valve.
Safe checks you can do
- Rule out airflow first: filter, returns, blower. A dirty coil mimics a low charge.
- Look for ice on the indoor coil and the large copper line. Turn the system off if ice is present.
- Do not add refrigerant from a can. Blends must be charged as a liquid by weight, and overcharging damages the compressor.
- Note the system age and the refrigerant type from the outdoor unit label. R-22 systems face much higher refrigerant costs than R-410A systems.
Likely causes
- Schrader valve leak — The service-port cores are a common slow-leak point and are often repairable in place.
- Brazed joint or flare fitting — Vibration and thermal cycling can open a joint. A flare fitting at the outdoor unit is a frequent culprit.
- Evaporator coil leak — Formicary corrosion in the indoor coil is a common cause in humid climates. Repair is often not practical; replacement is typical.
- Condenser coil leak — Corrosion from salt air and lawn chemicals can perforate the outdoor coil.
- Line-set damage — A nail, a weed trimmer or a kink in the copper line can cause a leak.
What a repair involves
The technician pressurizes the circuit with nitrogen and uses electronic leak detection or UV dye to locate the leak. Valve and joint repairs are reasonable on a sound system. A leaking evaporator coil on an older system is usually a replacement decision. After the repair, the system is evacuated and charged by weight to the nameplate charge.
Typical South Florida cost ranges
| Work | Published typical range | Notes |
|---|---|---|
| Diagnostic or service visit | $69–$250 | |
| Refrigerant leak repair and recharge | $200–$1,500+ | Wide range reflects leak location, refrigerant type and access. |
| Evaporator coil replacement | $700–$2,500 | |
| R-22 refrigerant | Not priced here | Older refrigerant is costly and supply is limited; ask the contractor for the current per-pound price in writing before approving work. |
Source: AC Service Pro (South Florida contractor cost guide), published 2026-07-13; Koala Coolin (South Florida contractor cost guide), published 2026-07-12. Both guides publish installed price ranges for South Florida; neither states its sample size. These are ranges, not quotes. The contractor sets the actual price after inspecting the system, and you approve it before work begins. See the cost guide methodology.
Seasonal context
Slow leaks are often noticed in the first heat wave, when the system can no longer keep up. A spring check that records pressures and line temperatures gives a baseline for the summer.
Where to go next
Find your city · Cost guide methodology · What to check before you call · All services
How a request is handled
Your request includes the symptom, your ZIP code, how soon you need help and the best time to reach you. If a participating contractor covers your ZIP, that one contractor receives it.
If no participating contractor covers the ZIP yet, we tell you and your request is not shared with anyone else.
We do not promise an arrival time. The contractor confirms availability with you directly.
Questions
How long can I keep adding refrigerant?
Topping off is a stopgap. Every pound added is refrigerant that will escape again, and repeated low charge shortens compressor life. A leak search is the responsible next step.
Is leak repair or replacement the better choice?
On a system under about ten years old with a repairable valve or joint, repair usually makes sense. On an older system with a leaking indoor coil, compare the repair cost with a replacement quote, including the efficiency difference.
Can a homeowner detect a refrigerant leak?
Sometimes by sound, oil residue or ice patterns, but the location requires electronic tools and nitrogen pressure testing. A visual inspection is not a leak search.
Request a callback
One contractor, if one serves your ZIP. No charge to you.
Request a callback
Tell us what is wrong. If a participating contractor serves your ZIP code, your request goes to that one contractor.