Home › Services › High electric bill
Problem guideWhy your electric bill jumped, and what to check on the AC
The air conditioner is the largest electricity user in most South Florida homes, so a bill spike usually points to it. Some causes are behavioral, some are maintenance, and some are equipment faults that quietly raise consumption for months. The useful approach is to separate a rate change and a weather change from a real system problem.
- Independent referral service
- No charge to homeowners
- One contractor receives your request
- No ratings or paid placements
Request a callback
Describe the symptom and your ZIP. One contractor receives it if one serves your ZIP.
Symptoms
- The bill rises while the thermostat settings and the household have not changed.
- The system runs continuously or cycles more than before.
- Some rooms are warmer than they used to be.
- The outdoor unit runs longer after the house reaches the set point.
- The bill jumps after a service visit or a new thermostat.
Safe checks you can do
- Compare the current bill with the same month last year, and check the rate per kWh, not just the total.
- Check the filter and the outdoor coil. A dirty condenser raises consumption measurably.
- Confirm the thermostat schedule and any away or vacation mode.
- Look for a heat strip or auxiliary heat running in cooling mode; that is a real fault and it is expensive.
- Check door and window seals, attic hatch and duct connections. Duct leakage in an attic is common and costly.
Likely causes
- Dirty condenser or filter — Restricted heat rejection raises compressor current and run time.
- Low refrigerant — A system that runs longer to do the same job uses more electricity.
- Auxiliary heat stuck on — Electric strip heat running with the AC is a large, avoidable load.
- Duct leakage — Conditioned air lost to the attic is paid for twice: once to cool it, once to cool the house again.
- Aging equipment — A compressor or fan motor nearing failure can draw higher current.
- Thermostat or sensor fault — A system that runs to a false temperature set point wastes energy.
What a repair involves
The diagnosis starts with a load comparison: run time, temperature split, compressor current and static pressure. Cleaning, a charge correction, duct sealing, a thermostat fix or a failing component replacement each have a different payback. A contractor should show the before-and-after readings rather than promise a percentage saving.
Typical South Florida cost ranges
| Work | Published typical range | Notes |
|---|---|---|
| Diagnostic or service visit | $69–$250 | |
| Coil cleaning | $150–$500 | |
| Duct sealing | $300–$1,200 | Published ranges vary widely with attic access and the number of leaks. |
| Thermostat replacement | $100–$500 |
Source: AC Service Pro (South Florida contractor cost guide), published 2026-07-13; Koala Coolin (South Florida contractor cost guide), published 2026-07-12. Both guides publish installed price ranges for South Florida; neither states its sample size. These are ranges, not quotes. The contractor sets the actual price after inspecting the system, and you approve it before work begins. See the cost guide methodology.
Seasonal context
South Florida bills climb with run time. A mild spring month compared with a hot summer month can differ by hundreds of dollars with no fault at all, which is why the comparison should be year over year at the same rate.
Where to go next
Find your city · Cost guide methodology · What to check before you call · All services
How a request is handled
Your request includes the symptom, your ZIP code, how soon you need help and the best time to reach you. If a participating contractor covers your ZIP, that one contractor receives it.
If no participating contractor covers the ZIP yet, we tell you and your request is not shared with anyone else.
We do not promise an arrival time. The contractor confirms availability with you directly.
Questions
How much of my bill is the AC?
In most South Florida homes the air conditioner is the largest single load, often around half of summer usage, but the exact share depends on the home, the rate plan and the equipment. Your utility's usage chart can show the seasonal shape.
Will a new system lower my bill?
A new system can be more efficient, but duct leakage and house envelope problems can erase much of the gain. Get the load and the ducts checked before buying on efficiency claims alone.
Why did my bill jump without a rate change?
Weather, run time, a dirty coil, a failing part and duct leakage are the usual causes. A service visit that records current and temperatures is the way to find out.
Request a callback
One contractor, if one serves your ZIP. No charge to you.
Request a callback
Tell us what is wrong. If a participating contractor serves your ZIP code, your request goes to that one contractor.